« 
 »
Aug 05 2012

My SDR – Ethernet link part

Posted by Guenael in Radio & Wifi, tags: , , , , ,

I finally started my big SDR project, and this week-end, a major piece has fallen. I wrote the microcode for the PIC32 microcontroller and debugged the communication between the PC software (a plugin for HDSDR) and the device. This part can be resumed to a sound card over Ethernet. Most of SDR hardware required to be close to the computer (ex. USB connection or audio connection to the sound card) and my wish is to build a full SDR system that could be operated remotely and placed close to the antenna. Above all, this is important for the hyperfrequency because the loss in the coaxial cable are important at these frequencies.

The next step is now to design and build the PCB. This is not really a problem and this is the funny part for me. A few more efforts and I will be able to play with my full SDR system :)

PIC32 Dev Kit sending the UDP data to HDSDR

Be Sociable, Share!

This entry was posted on Sunday, August 5th, 2012 at 16:19 and is filed under Radio & Wifi. You can follow any responses to this entry through the RSS 2.0 feed. You can leave a response, or trackback from your own site.

Leave a Reply

Merci de remplir le Catcha ci-dessous pour prouver que vous êtes humain / Prove you are human by reading this resistor:
0Ω+/- 5%

0
0
1
2
3
4
5
6
7
8
9

0
0
1
2
3
4
5
6
7
8
9

0
0
1
2
3
4
5
6
7
8
9

5
5
10
20

Faites correspondre chaque glissière aux couleurs de la résistance. Une fois validé correctement, votre commentaire sera publié immédiatement. Si vous ne voyez pas les glissières, vérifier que JavaScript est bien activé sur votre navigateur. Ce système est un anti-spam / anti-bot, merci de votre compréhension.

Cliquer ici pour un autre résistance.

Si vous souhaitez en savoir plus sur les résistances et le code des couleurs, consulter la page Wiki ici.